Filter
Top Products
10 HP Pavilion LCD HDTV User’s Guide
1 Carefully place the TV with the glass screen facing
downward on a padded, stable table. Position the
bottom of the TV near the edge of the table.
Refer to the figures in “Removing or attaching the
stand” on page 8.
2 Proceed with the steps for your type TV stand:
■ For a paddle-type stand, continue with step 3.
■
For a pedestal-cover stand, continue with step 5.
3 For the TV with a paddle-type stand, position the
stand on the TV and align the four screw holes.
(Refer to the figure in step 4 of the previous
procedure.) Insert the four screws to secure the
stand to the TV.
4 Carefully lift the TV and set it upright. This
completes stand installation for this type stand.
5 For the TV with a pedestal-cover stand, the tabs
(C) in the mounting area of the TV from the slot for
the pedestal leading edge. (Refer to the figure in
step 6 of the previous procedure.) Hold the stand
with the front (thin) edge pointing down and the
pedestal horizontal. Lower the stand onto the TV
with the pedestal in the mounting area. Then, slide
the stand forward until the leading edge is
underneath the tabs (C) and the screw holes (D)
align.
6 Insert the screws into the four holes (D).
7 Position the pedestal cover (B) over the pedestal,
tip the cover to place the top edge into the
mounting area, and then lower the cover onto the
pedestal. (Refer to the figure in step 5 of the
previous procedure.) Move the cover to align the
cover with the screw hole, and insert the retaining
screw.
8 Carefully lift the TV and set it upright. This
completes stand installation for this type stand.
Setting Up the TV
Set up the TV by attaching and connecting the display
speakers, connecting cables, and connecting the
power cord. Some TV models come with speakers
attached.
Attaching and connecting the
display speakers
Speakers with speaker cables attach to each side of
the display. The right speaker is located on the right
side of the display when it is viewed from the front.
The TV has a digital audio output that you can connect
to a separate external amplifier.
w
WARNING: The stand is heavy. Do not drop
the stand onto the TV.