Filter
Top Products
Changing the TV Settings
Changing the TV Settings 61
Setting Input Label
This option selects a name (from a list) for the Input source.
Setting Picture Flip
This Setup option sets the orientation of the picture.
Select (view) the input prior to setting the Picture Flip
mode.
Setting Standby Mode
This option sets the TV mode for standby.
Standby Mode may be set to Mode1, which starts the
TV quickly from standby, or to Mode 2, which
conserves energy while on standby.
To set the TV to turn off automatically to save energy,
refer to “Using the Power Control Menu” on page 58.
Setting Language
This option sets the OSD language; choose English,
French, or Spanish.
Using the Options Menu
The Options menu items shown depend on the Input
selected.
■ HDMI Setup sets options for the device
connected to Input4.
■ Audio Only, when set to On, turns the LCD
display off and only audio is output. Use this
setting to hear audio only when listening to music
from a music program.
When listening to music from a music program,
you can set the LCD display off and hear audio
only.
■ Digital Noise Reduction, when set it to High
or Low, minimizes analog noise or interference on
a analog channel.
n
You cannot change labels for the TV or the
i.LINK Input Sources.
Picture Flip mode Example
Standard (normal image)
Mirror (mirror image)
Upside Down (upside down
image)
Rotate (rotated image)
ABC
ABC
ABC
ABC
HDMI
Setup Selectable items
Signal
Type
Auto/RGB/YCbCr 4:4:4/
YCbCr 4:2:2
Select the signal type from an
HDMI terminal. Unless the image
quality looks obviously poor, select
Auto.
Color
Matrix
Auto/ITU601/ITU709
Select the internal color space
conversion method when an RGB
signal is input. Normally, select
Auto.
Dynamic
Range
Standard/Out of Standard
Select the signal amplitude range.
Normally, select Standard.
Auto
View
Enable/Disable
Set whether or not to use VIEW
MODE based on signal
recognition, including an HDMI
signal.