HP (Hewlett-Packard) LC3700N Flat Panel Television User Manual


 
Setting Up
Setting Up 13
You can use either Digital Cable In or Digital Air In, or use both. To view low numbered cable channels, be sure to
connect your cable TV source to the Analog In connector.
A: Analog Air In connector
B: Digital Air In connector
C: Digital Cable In connector
D: Antenna (air analog or air digital signal
source)
E: Splitter
F: Analog In and Digital Air In
G: Cable at wall (cable analog or cable
digital signal source)
H: Analog In and Digital Cable In
2 Connect power to the TV; see “Connecting power
to the TV” on page 25.
3 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 27.
Using a CableCARD
Use these steps when you have a CableCARD (certain
countries/regions only) for premium digital cable
service and you do not want to use a set-top box from
the cable provider.
To use a digital set-top box, refer to “Connecting cable
or satellite with a set-top box” on page 15.
D
E
G
E
H
F
C
A
B
n
If you change your address, return the
CableCARD to your cable company. Obtain
a new CableCARD from your new cable
provider.
!
Your TV supports use of a CableCARD,
provided by the cable company, when
using a direct digital connection to a cable
system providing encrypted digital
programming. Note that some interactive
or on-demand services may still require
use of a set-top box provided by the cable
company. For more information, contact
your cable company.