Filter
Top Products
13
Insignia NS-FSDVDR DVD recorder
www.insignia-products.com
When you have selected the correct input
source, the
Initial Setting
screen opens.
4 Press or to select the on-screen menu
language, then press ENTER. You can select
English, Français, or Español.
5 Press ENTER. Your recorder starts
searching for channels available in your area.
Your recorder stores the channel information
in the channel list. When the search is
complete, the
Clock Setting
screen opens.
6 Press ENTER, then go to Step 3 in “Manually
setting the clock” on page 14 and complete
the rest of the task to set the clock.
Scanning for channels
When you turn on your recorder for the first time,
it automatically scans for channels available in
your area. Your recorder stores the channel
information in the channel list.
When you press CHANNEL or CHANNEL
(on the front of your recorder) or CH or CH
(on the remote control), your recorder goes to
the next higher or lower channel in the channel
list. Your recorder skips channels that do not
have a signal.
You do not need to scan for channels unless:
• You change the type of TV connection. For
example, you change from an outside
antenna to cable TV.
• More channels become available.
• You move your recorder to a new viewing
area.
To scan for channels:
1 Press SETUP. The
Setup
menu opens.
2 Press or to select Channel, then press
ENTER. The
Channel
menu opens.
3 Press or to select Auto Preset, then
press ENTER. Your recorder starts scanning
for channels in your area.
4 When the scan is complete, press SETUP to
close the menu.
To stop the scan before it is complete, press
RETURN or SETUP.
Adding or deleting channels
You can add channels that were skipped
because of a weak signals to the channel list, or
you can delete channels you do not want from
the channel list.
To add or delete channels:
1 Press SETUP. The
Setup
menu opens.
2 Press or to select Channel, then press
ENTER. The
Channel
menu opens.
3 Press or to select Manual Preset, then
press ENTER. The
Manual Preset
screen
opens.
4 Press CH or CH to select a channel in the
channel list, or press or to select a
channel that is not in the channel list.
5 Press or to select Add or Delete, then
press ENTER.
6 Press SETUP to close the menu.
Panasonic TV/VIDEO
RCA INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung TV/VIDEO
Sanyo VIDEO
Sharp 00
Sony VIDEO1, VIDEO2, VIDEO3
Toshiba TV/GAME
Zenith 00
Brand Input source
Initial Setting
Français
Español
English
Initial Setting
Clock Setting
Note
If you stop the scan before it is complete,
channels that have not been scanned are not
stored in the channel list.
Setup
Playback
Display
Recording
Clock
Channel
Disc
Required Setting
Manual Preset
CH 2
Add
Delete
08-1031_NS-FSDVDR.fm Page 13 Wednesday, March 12, 2008 2:53 PM