Filter
Top Products
33
Insignia NS-FSDVDR DVD recorder
www.insignia-products.com
Recording from an external device
To record from an external device, you need to
select the video source in the
Setup
menu, then
record.
To select the video source in the
Setup
menu:
1 Make sure that the external device, such as a
VCR or camcorder, is connected to your
recorder.
2 Press SETUP. The
Setup
menu opens.
3 Press or to select Required Setting,
then press ENTER. The
Required Setting
menu opens.
4 Press or to select Select Video, then
press ENTER. The
Select Video
menu
opens.
5 Press or to select L1 (Rear) or
L2 (Front), then press ENTER. The
Select
Video L1 (Rear)
or
Select Video L2 (Front)
screen opens.
6 Press or to select Video In (if the device
is connected to the A/V jacks) or S-Video In
(if the device is connected to the S-Video
jack), then press ENTER.
7 Press SETUP to close the menu.
To record from an external device:
1 Turn on the TV and your recorder.
2 On the TV, select the video source that your
recorder is connected to. For a list of
common video sources by TV brand, see “TV
video input sources” on page 12.
3 Press OPEN/CLOSE to open the disc tray.
4 Insert a formatted DVD with enough space
for the recording into the tray with the label
facing up.
5 Press OPEN/CLOSE to close the disc tray.
Your recorder reads the DVD. This may take
a while.
6 If the external device is connected to the
jacks on the back of your recorder, press 001
on the remote control or press
CHANNEL or CHANNEL on the front of
your recorder to select L1.
Or, if the external device is connected to the
jacks on the front of your recorder, press 002
on the remote control or press
CHANNEL or CHANNEL on the front of
your recorder to select L2.
7 Press REC SPEED to select a recording
speed.
8 Press REC/OTR on the front of your
recorder. Your recorder starts recording.
9 Start playback on the external device.
10 Press STOP to stop the recording.
Protecting a DVD
To avoid accidentally recording, editing, or
erasing a DVD, you can protect the DVD.
To protect a DVD:
1 Press SETUP. The
Setup
menu opens.
2 Press or to select Disc, then press
ENTER. The
Disc
menu opens.
3 Press or to select
Disc Protect OFF ON, then press ENTER.
The
Disc Protect OFF ON
screen opens.
4 Press or to select Yes, then press
ENTER. The DVD is protected.
Finalizing a DVD
After you have recorded a DVD, you can finalize
it so you can play it on another DVD player.
To finalize a DVD:
1 Press SETUP. The
Setup
menu opens.
2 Press or to select Disc, then press
ENTER. The
Disc
menu opens.
E31-E32 DVD already contains 99 titles
(maximum number)
E33 DVD already contains 999 chapters
(maximum number)
E34 No space on the DVD for control
information
E35 PCA full
E36 DVD formatted in Video mode has
already been finalized
E40 Some portion has not been recorded
because of program overlapping.
Recording did not start on time.
E41 Power failed
E42 No DVD in the tray at the recording
time
Select Video
nI oediV )tnorF( 2L
nI oediV )raeR( 1L
Note
The DVD protection feature only works with DVDs
formatted in VR mode.
Note
To remove DVD protection, select No in Step 4.
Notes
• Finalizing a DVD formatted in Video mode may
take as long as 15 minutes. Finalizing a DVD
formatted in VR mode may take as long as one
hour.
• The more blank space on a DVD, the long it
takes to finalize.
• Do not unplug the power cord or turn off your
recorder while finalizing a DVD.
No
Yes
Disc Protect OFF ON
08-1031_NS-FSDVDR.fm Page 33 Wednesday, March 12, 2008 2:53 PM