Insignia NS-FSDVDR DVD Recorder User Manual


 
31
Insignia NS-FSDVDR DVD recorder
www.insignia-products.com
Using One-Touch recording
You can quickly set the amount of time you want
your recorder to record before it stops recording
and goes into standby mode.
To use One-Touch recording:
1 Press OPEN/CLOSE to open the disc tray.
2 Insert a formatted DVD with enough space
for the recording into the tray, with the label
facing up.
3 Press OPEN/CLOSE to close the disc tray.
Your recorder reads the disc. This may take
a while.
4 Press REC SPEED to select a recording
speed.
5 Press CH or CH or press the number
buttons to select the channel you want to
record.
6 Press REC/OTR repeatedly to select the
amount of time you want to record. Each time
you press the button, the recording time
increases by 30 minutes up to 8 hours.
Recording begins immediately. When the
recording is complete, your recorder stops
recording and goes into standby mode.
7 To change the amount of recording time,
press REC/OTR repeatedly until the time you
want appears.
8 To cancel the recording before the time runs
out, press STOP .
Setting up a timer recording
You can schedule as many as eight recordings
within a month. You can also schedule daily and
weekly recordings.
To set up a time recording:
1 Make sure that the clock is set. For more
information, see “Automatically setting the
clock” on page 14 or “Manually setting the
clock” on page 14.
2 Insert a formatted disc into the disc tray, then
close the tray.
3 Press TIMER PROG. The
Timer
Programming
screen opens.
4 Press or to select a program number,
then press ENTER.
5 Press or to enter the recording Date,
then press .
6 Press or to enter the Start time, then
press .
7 Press or to enter the End time, then
press .
8 Press or to select the channel number,
then press . To record from an external
device, select L1 (Line1) or L2 (Line2).
9 Press or to select a recording speed.
Notes
Press DISPLAY to view the remaining recording
time.
You cannot pause a One-Touch recording.
Timer Programming
2. ---
3. ---
4. ---
---
1.
Date Start End CH Speed
Timer Programming
2. ---
3. ---
4. ---
1. --:-- --:-- L1
Date Start End CH Speed
JAN/01
Timer Programming
2. ---
3. ---
4. ---
1. JAN/01 --:-- L1
Date Start End CH Speed
12:57AM
Timer Programming
2. ---
3. ---
1. JAN/01 12:57AM 1:57AM
Date Start End CH Speed
CH 8
Timer Programming
2. ---
1. JAN/01 12:57AM 1:57AM CH 8 1H
Date Start End CH Speed
08-1031_NS-FSDVDR.fm Page 31 Wednesday, March 12, 2008 2:53 PM