Filter
Top Products
Operating the VP-747
25
25
9 Operating the VP-747
You can operate the VP-747 via the:
• OSD Menu, see
• LCD Display, see
Section 9.1
• Infrared Remote Control Transmitter, see
Section 9.2
• ETHERNET/RS-232, see
Section 9.3
9.1 Operating via the OSD MENU Screen
Section 9.4
The OSD superimposes a menu on the Preview screen from which you can
control your VP-747. When the OSD front panel button is on, pressing the
MENU button on the front panel or the Menu key on the infrared remote
control transmitter displays the first OSD screen
1
, the “Preview Setting”
screen. If the OSD is off, pressing the MENU button on the front panel or the
Menu key on the infrared remote control transmitter will not display the
“Menu screen”. In this case, you can navigate via the front panel LCD.
Figure 10 defines the six interactive icons:
Figure 10: Menu Screen Icons
9.1.1 Preview and Program Setting Commands
Figure 11 and Table 5 define the Preview and Program Setting commands:
Figure 11: Preview and Program Setting OSD Menus
1 Or the last used OSD screen