Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-747
28
Setting Function Selection/Range Default
Output
Resolution
640x480x60Hz, 640x480x75Hz,
800x600x50Hz, 800x600x60Hz,
800x600x75Hz, 832x624x60Hz,
852x480x60Hz, 1024x768x50Hz,
1024x768x60Hz, 1024x768x75Hz,
1280x768x50Hz, 1280x768x60Hz,
1280x720x60Hz, 1280x800x60Hz,
1280x1024x50Hz, 1280x1024x60Hz,
1280x1024x75Hz, 1366x768x50Hz,
1366x768x60Hz, 1400x1050x50Hz,
1400x1050x60Hz, 1440x900x60Hz,
1600x1200x50Hz, 1600x1200x60Hz,
1680x1050x60Hz, 1920x1080x50Hz,
1920x1080x60Hz, 1920x1200x60Hz,
480px60Hz, 576px60Hz, 720px50Hz,
720px60Hz, 1080ix50Hz, 1080ix60Hz,
1080px50Hz, 1080px60Hz, 1080p@24Hz or
Custom (from 1 to 4)
1
1024x768x
60Hz
HQV Color Setting
Set the Red, Green, Blue, Cyan, Magenta and
Yellow saturation
-100 to 100 0
Setup
Input Mode Setting (see Figure 12)
Output mode setting (see Figure 13)
Geometry
Application
Select the output application Keystone, Anyplace or
Rotation
keystone
Location
Select the location of the display Front, Ceiling, Rear or
Rear ceiling
Front
Horizontal
Keystone
Adjust the horizontal keystone
2
-40 to 40 0
Vertical Keystone Adjust the vertical keystone
3
-30 to 30 0
Diagonal
Projection
Move the location of each corner of the display
separately
4
Top Left, Top Right,
Bottom Left, Bottom Right
or Reset (to reset
diagonal projections
settings)
Top Left
Pincushion/Barrel
Adjust the pincushion or barrel appearance of
the screen
5
-20 to 20
0
Rotation
Rotate the display clockwise or
counterclockwise (in 1° increments)
-180 to 180 0
Reset all
Resets the geometry settings to their default
values
1 If the custom resolution is set to be the same as the default resolution, the scaler refers to the default resolution
2 If the projector is located at an angle to the left or right of the screen
3 If the projector is located at an angle above or below the screen
4 Horizontally and vertically
5 For projection onto curved surfaces