Filter
Top Products
25
Leica CM1950 – Cryostat
6.5 Installing Accessories/Inserting Chamber Accessories
6.5.1 Installing the Adjustable Footrest (Optional)
• To install the optional footrest, unscrew the
screws (1) using the No. 3 Allen key provided.
1
• Attach the holders (2) for the footrest on the
left and right to the front wall of the housing.
To do so, use the Allen screws you used earli-
er. Ensure that the screws are tight.
• Hook the footrest (3) into the installed holder
according to individual requirements (height).
• Once installed, the user can adjust the height
of the footrest at any time by relocating it (3)
to the desired height on both sides in the
holder (2).
2
3
Fig. 20
6. Installation
When installing the holder (2), ensure
that the cutout faces downwards so that
the support (3) can be hooked in.