Filter
Top Products
57
Leica CM1950 – Cryostat
Anti-roll guide system functions as a
knife guard here!
1. Fold the anti-roll guide system (4) to the left –
while doing so, hold the lever (11) (not the
adjusting screw of the anti-roll guide) so that
the height of the anti-roll guide remains
unchanged.
2. Open the clamping lever (10) by turning it coun-
terclockwise.
3. Carefully insert the blade (9) from above or
from the side between the pressure plate and
the blade rest. Ensure that the blade is insert-
ed so that it is centered.
4. Rotate lever (10) clockwise to clamp.
5. Fold the anti-roll guide system (4) back to the
side using the lever (11).
Lateral shift for Blade Holder CE
If the sectioning results are not satisfactory, the
knife holder can be shifted sideways in order to
use another part of the blade.
To do so, follow these steps:
1. Release the clamping lever (8) by folding it
back and move the knife holder back until the
desired position is reached (3-point click stop
enables you to accurately find a new cutting
position).
2. Fold the clamping lever (8) forwards for
clamping.
Inserting the blade into knife holder CE
Fig. 45
11. Optional Accessories
8
9
7
10
11
4
Fig. 46
8