Filter
Top Products
56
Operating Manual V1.1 – 05/2007
The knife guard is folded
away in the detail view.
Knife guard folded away
Fig. 43
Four possible
settings
Blade rest (ruler) for low-profile
blades
1
2
1
2
6
Fig. 44
11. Optional Accessories
Red elements on the blade or knife
holders, such as the knife guard and
ejector, are protective devices that
may not be removed.
3
4
7
The anti-roll guide and
pressure plate must be
parallel to each other.
6
• Blade ejector (1) and knife guard (2)
• Integrated lateral shift and stable base
• Clearance angle adjustment using size 3 Allen
key (recommended angle between 2° and 5°)
• With finger rest (6) for brush specimen
• Clamping lever (8) for lateral shift must point
downward to permit unhindered shifting of
finger rest.
• when using BB knives, remove the knife
support (7).
Conversion of blade holder with anti-roll guide
to blade holder with finger rest
• Screw off the anti-roll guide.
• Unscrew left Allen screw using 2.5 mm Allen
key and remove base of anti-roll guide.
• Attach the finger rest (6) from the left, tighten
the hexagon-head screw using the No. 2.5
key – be careful of the blade ejector!
If you are working with the brush
technique, the knife guard must be
folded upwards.
Blade holder CE with finger rest (for NB + BB)
7
8
5