Filter
Top Products
8
Operating Manual V1.1 – 05/2007
2. Safety and Design
Opening the packaging
1. Remove the 3 screws (1) on each of the two sides of the
box (7) at the top.
2. Remove the 2 screws on each of the 4 hinges (2) on the
front and rear side of the box.
Do NOT remove the screws of the hinges on the top
lid!
3. Remove 1 screw (3) between the two hinges on the front
and rear side of the box.
4. Remove the 3 screws (4) at the bottom on all four sides
of the box.
5. Of the two vertical rows of screws (5), remove one on
either side (which side does not matter) entirely.
22
7
1
3
When the instrument is delivered, check the tilt indicators on the
packaging.
If the arrowhead is blue, the shipment was transported laying flat,
was tilted at too great an angle or fell over during transport.
Note this on the shipping documents and check the shipment for
possible damage.
Fig. 2
4
5
5
5
4
8
8
8
8
8
17
9
9
Cover = ramp
10
14
11
11
Fig. 3