Filter
Top Products
18
ENGLISH
5.1 CHANNEL AUDIO OUT
5.1 channel audio refers to the current industry surround
sound standard requiring two front speakers, a center
speaker, two surround (rear) speakers and a sub woofer.
Although in actuality there are 6 channels, because the sub
woofer channel, or LFE channel, makes up a mere fraction of
the total audio soundtrack, it has been designated as the 0.1
of the 5.1 system.
By utilizing the player’s internal multichannel audio decoder,
the audio of DVD-Audio, Dolby Digital, DTS and MPEG DVDs
can be output from the 5.1 channel discrete outputs to an AV
amplifier or receiver with 5.1 channel input capability.
• Use audio cables to make connections from the player’s
AUDIO OUT (5.1 channel) jacks to the equivalent input
jacks on the AV amplifier or receiver.
• When making 5.1 channel analog audio connections, be
sure to match the left and right channels on both
components, and also make sure that the jacks of all the
channels are connected correctly on both components.
• Either 2 single audio cords or a stereo cord may be used to
connect the CENTER and SUB WOOFER channels to the
AV amplifier or receiver.
• When making this kind of connection, be sure to select [5.1
Channel] in the Setup Navigator [Analog Jacks] screen
(page 21).
AV amplifier or receiver
S1/S2
AC IN
R
C
B
Y
COMPONENT
C
SURROUND
LR
CENTER
WOOFER
SUB
LEFT
RIGHT
1
22
1
VIDEO OUTPUT
OUTPUT
AUDIO
COAXIALOPTICAL
VIDEO
EXTERNAL INTERNAL
2
REMOTE CONTROLDIGITAL OUTPUT
IN
OUT
1
SURROUND
LR
CENTER
WOOFER
SUB
LEFT
RIGHT
1
22
1
OUTPUT
AUDIO
DIRECT IN
CENTER
DVD
R
L
SURROUND
LR
SUB
WOOFER
Video Connections
This player features S-video, composite, and component
video output possibilities.
Check the manual supplied with your TV or monitor to
determine the best possible connection for your system.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size. You
can use the [Setup Navigator] in the Setup screen General
to set whether you are using a wide screen or standard size
TV or monitor (page 21). Additionally, you can use the [TV
Screen] setting in the Setup screen Video menu (page 36).
VIDEO OUT
• Make composite video connections to a standard TV or
monitor with a video input jack.
• Use the supplied video cable to connect one of the VIDEO
OUT jacks on the player to the video input on the TV or
monitor.
• Be sure to match the color of the plug with the color of the
jack (yellow).
TV or
monitor
S-VIDEO OUT
• Make S-video connections to a TV or monitor with S-video
input to produce a high quality video image.
• Use an S-video cable (not supplied) to connect the S-
VIDEO OUT jack on the player to S-video input on the TV
or monitor.
(Included)
S1/S2
AC IN
R
C
B
Y
COMPONENT
C
SURROUND
LR
CENTER
WOOFER
SUB
LEFT
RIGHT
1
22
1
VIDEO OUTPUT
OUTPUT
AUDIO
COAXIALOPTICAL
VIDEO
EXTERNAL INTERNAL
2
REMOTE CONTROLDIGITAL OUTPUT
IN
OUT
1
VIDEO IN
VIDEO
2
1
S1/S2
AC IN
R
C
B
Y
COMPONENT
C
SURROUND
LR
CENTER
WOOFER
SUB
LEFT
RIGHT
1
22
1
VIDEO OUTPUT
OUTPUT
AUDIO
COAXIALOPTICAL
VIDEO
EXTERNAL INTERNAL
2
REMOTE CONTROLDIGITAL OUTPUT
IN
OUT
1
S-VIDEO IN
S1/S2
TV or
monitor