Filter
Top Products
56
ENGLISH
To make a program of your favorite parts of a disc
as it plays – DVD/Video CD/CD
With this player, it is possible to make a program as you
watch a DVD or Video CD or while listening to a CD.
Press and hold PROGRAM for at least 2 seconds at
any point during playback of a title, group, chapter, or
track you want to program, and it will be made into or
added to a program without displaying a Program
screen. When a title, group, chapter, or track is
successfully added to the program, it is shown
momentarily in the display as well as its position in the
program.
To confirm the contents of a program:
Press PROGRAM.
Notes
• When using this function to program DVDs, the program being
created corresponds to the Program screen (chapter/track or
title/group) that appears when PROGRAM is pressed. Be sure to
check that the appropriate program type is selected.
• You cannot make a program containing chapters/tracks in
different titles/groups.
To save a program in memory – DVD-Video
This player can memorize the programs on up to 24 DVDs.
By turning the [Program Memory] to [On], the player will save
your program and recall it the next time you use the same
DVD. When the program memory exceeds 24, programs will
be erased in chronological order from the oldest program in
memory.
1 Move the cursor control joystick down to highlight
[Program Memory] and then right to select [On].
2 Press ENTER.
The program is saved in memory.
Notes
• When a DVD with a program stored in memory is loaded,
program playback may start automatically.
• You can’t use Program Memory with DVD-Audio discs.
Program Chapter Program Title
Current:
Title
Title
1
(Chapter 1 ~ 49)
Program Memory
PROGRAM
ExitMove
09 07 18
On
Off
7
Chapter
1
Chapter 07 3 Program 03
To erase a program saved in memory –
DVD-Video
The player erases programs in chronological order when the
maximum number of programs that can be held in memory is
exceeded. To prevent the player from erasing older programs
that you may still use regularly, or when you don’t want to use
a program anymore, it is possible to manually erase
programs stored in memory.
1 Load a DVD that has a program stored in memory.
2 Press PROGRAM.
The program screen appears.
3 Move the cursor control joystick down to highlight
[Program Memory] and then right and down to
select [Off].
4 Press ENTER.
The program is cleared from memory.