Filter
Top Products
32
ENGLISH
Digital Out
Depending on your preferences and the type of connections
made, you may opt not to have the digital audio signal output
at all. When this setting is set to [Off] there is no signal output
from the digital audio output jacks.
Make changes to the [Digital Out] setting in the Setup screen Audio
1 menu in the [Expert] menu mode (page 30).
MPEG Ou
t – MPEG 3 PCM
Dolby Digital Out –
DTS Out –
Linear PCM Out – Down Sample On
Move
Exit
Dolby Digital
Off
SETUP
Audio1 Audio2 GeneralLanguageVideo
Digital Out On
Off
On
MPEG Out
This player is capable of outputting the MPEG digital
bitstream. When the player is connected to an AV component
that has a built-in MPEG decoder, select the [MPEG] setting.
Otherwise, select [MPEG 3 PCM] to convert the digital signal
to the PCM signal, the digital signal output from a CD.
Settings: MPEG
MPEG 3 PCM*
* Factory setting
Settings: On (Digital signal is output)*
Off (Digital signal is not output)
* Factory setting
MPEG Ou
t - PCM
Dolby Digital Out –
DTS Out –
Linear PCM Out – Down Sample On
Move
Exit
Dolby Digital
Off
SETUP
Audio1 Audio2 GeneralLanguageVideo
Digital Out – On
MPEG 3 PCM
MPEG
Adjusting the Dynamic Range
of the Audio Soundtrack – DVD
Audio DRC stands for Audio Dynamic Range Compression.
When Audio DRC is on, soft sounds such as dialog can be
heard more clearly without making loud sounds even louder.
Select from three levels of compression depending on how
much effect you want. When Audio DRC is set to [Off], there is
no effect on the audio source.
Make changes to the [Audio DRC] setting in the Setup screen
Audio 2 menu.
Audio Out –
Speaker Setting
Gain Setting –
CD Digital Direct – Off
Audio DRC
Move
Exit
High
Medium
Low
Off
SETUP
Audio1 Audio2 GeneralLanguageVideo
Settings: High
(maximum compression of audio source)
Medium
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
* Factory setting
Note
Audio DRC is only effective with Dolby Digital audio sources.