Filter
Top Products
19
ENGLISH
COMPONENT VIDEO OUT
• Make component video connections to a TV or monitor with
component inputs to produce a higher quality video image.
• Use a component video cable or 3 video cords (not
supplied) to connect the COMPONENT VIDEO OUT jacks
on the player to the component jacks on the monitor.
S1/S2
AC IN
R
C
B
Y
COMPONENT
C
SURROUND
LR
CENTER
WOOFER
SUB
LEFT
RIGHT
1
22
1
VIDEO OUTPUT
OUTPUT
AUDIO
COAXIALOPTICAL
VIDEO
EXTERNAL INTERNAL
2
REMOTE CONTROLDIGITAL OUTPUT
IN
OUT
1
COMPONENT
VIDEO IN
C
Y
R
B
C
R
B
Y
COMPONENT
C
VIDEO OUTPUT
C
TV or
monitor
System Control Connections
REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio
component using a supplied System Control cable, you can
remotely operate the components as a single system.
• When connecting to component with a remote sensor
(such as the SR-14, SR-18, SR-19), be sure to connect the
“REMOTE CONTROL IN” jack of this DVD player to the
“REMOTE CONTROL OUT” jack of the component with the
remote sensor.
• When connecting to component which is not equipped with
a remote sensor, be sure to connect the component to the
“REMOTE CONTROL OUT” jack of this DVD player.
Synchronized power on and off
• Connect with the remote control output jack of a
component (such as the SR-14, SR-18, SR-19) which is
compatible with Marantz remote control system. The
remote control allows to switch the power of this DVD
player to “POWER ON and Standby mode”.
Note
be sure to leave power switch on the Front panel in the power
mode.
Remote switch
• When using this DVD player independently, set this switch
to “INTERNAL”. When using this DVD player in a system
with a Marantz tuner or timer equipped with a remote
sensor, set the switch to “EXTERNAL.
S1/S2
AC IN
R
C
B
Y
COMPONENT
C
SURROUND
LR
CENTER
WOOFER
SUB
LEFT
RIGHT
1
22
1
VIDEO OUTPUT
OUTPUT
AUDIO
COAXIALOPTICAL
VIDEO
EXTERNAL INTERNAL
2
REMOTE CONTROLDIGITAL OUTPUT
IN
OUT
1
OUT
IN
REMOTE
CONTROL
EXTERNAL INTERNAL
IN
OUT
D1/D2 (Component) Video Out (NTSC) (except for
USA model)
If your TV has a D VIDEO INPUT jack, you can use a D Video
cable (not supplied) to connect it to the D1/D2 output on this
unit.
About D Video
The designation of a D Video jack indicates the kinds of
signal it is compatible with.
D Video Compatibility designation
D2 525i(480i), 525p(480p)
D1 525i(480i),
i = interlaced
p = progressive scan (non-interlaced)
S1/S2
AC IN
R
C
B
Y
COMPONENT
C
SURROUND
LR
CENTER
WOOFER
SUB
LEFT
RIGHT
1
22
1
VIDEO OUTPUT
OUTPUT
AUDIO
COAXIALOPTICAL
VIDEO
EXTERNAL INTERNAL
2
REMOTE CONTROLDIGITAL OUTPUT
IN
OUT
1
D1/D2 IN
D1/D2
Making Connections