Filter
Top Products
Getting Started4
16
Playing discs
The basic playback controls for playing discs are
covered here. Further functions are detailed in the
next chapter.
Note
Throughout this manual, the term ‘DVD’ means DVD-
Video, DVD-Audio and DVD-R/RW. If a function is specific
to a particular kind of DVD disc, it is specified.
1 Switch the player on.
If you’re playing a DVD or Video CD, also turn on your TV
and make sure that it is set to the correct video input.
2Press OPEN/CLOSE to open the disc tray.
3 Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you’re loading a double-
sided DVD disc, load it with the side you want to play face
down).
4 Playing a DVD automatically.
If you’re playing a DVD or Video CD, a menu may appear
(see page 17).
Note
For one-sided, two-layer discs containing movies, etc.,
there may be a short image stoppage at the point where
the layers change. This is not a malfunction.
Basic playback controls
Button What it does
3 Starts playback.
DVD and Video CD: if the display shows RESUME,
playback starts from the resume point.
8
Pauses a disc that’s playing.
7 Stops playback.
DVD and Video CD: Display shows RESUME. Press
7 (STOP) again to cancel the resume function.
1 1. Press for fast reverse scanning during play.
2. Press again to increase the scan speed. (Super
Audio CD and CD have 4 scan speeds; DVD and
Video CD have 7.) Press 3 (PLAY) to resume
normal playback.
¡ 1. Press for fast forward scanning during play.
2. Press again to increase the scan speed. (Super
Audio CD and CD have 4 scan speeds; DVD and
Video CD have 7.) Press 3 (PLAY) to resume
normal playback.
4 Skips to the start of the current track or chapter,
then to previous tracks/chapters.
¢ Skips to the next track or chapter.
Important
While using the DVD playback controls, you may see the
mark displayed on-screen. The mark means that the
operation is not allowed by the player and disc.
POWER
PLAY
NEXT
PREV.
PAUSE
STOP
OPEN/
CLOSE
FF
REW