Filter
Top Products
4
Handling Cautions
• Before connecting other components to this player, be sure
to turn them all off.
• Do not move the player while a disc is being played, or the
disc may be scratched or broken, and the player’s internal
parts may be damaged.
• Do not put a flower vase filled with water or any small metal
objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity
can affect normal operation of this player. If this occurs,
turn the player off and on again with the POWER button.
The player will operate normally.
• Be sure to remove the disc and turn off the player after
use.
• Disconnect the AC power cord from the AC outlet when
you don’t intend to use the player for long periods of time.
• Clean the disc by wiping in a straight line from the inside to
the outside of the disc.
• This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been
adhered to.
•To prevent fire or shock hazard, do not place objects filled
with liquids, such as vases, on the apparatus.
• Do not insert anything into the equipment through the
ventilation holes.
• Do not handle the mains lead with wet hands.
• Do not cover the ventilation with any items such as
tablecloths, newspapers, curtains, etc.
• No naked flame sources, such as lighted candles, should
be placed on the equipment.
• Make a space of about 0.1 meter around the unit.
Disc Storage
Be careful not to harm the disc because the data on these
discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
•Keep in a cool ventilated area.
• Store vertically.
•Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord
from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
Operating Environment
Operating environment temperature and humidity:
+5°C to +35°C (+41°F to +95°F); less than 85%RH (cooling vents
not blocked)
Do not install in the following locations
÷ Location exposed to direct sunlight or strong artificial light
÷ Location exposed to high humidity, or poorly ventilated location