Filter
Top Products
5Playing Discs
31
English
Film 1: Standard setting
Film 2: Setting for moving images
Film 3: Setting for still images
• DNR – Adjusts the amount of noise reduction
(NR) applied to the Y (brightness) component
• CNR – Adjusts the amount of noise reduction
(NR) applied to the C (color) component
• MNR – Adjusts mosquito noise occurring
around edges in MPEG-compressed video
• BNR – Adjusts block noise occurring in MPEG-
compressed video
• Sharpness High – Adjusts the sharpness of the
high-frequency (finely detailed) elements in the
picture
• Sharpness Mid – Adjusts the sharpness of the
mid-frequency (less detailed) elements in the
picture
• Detail – Adjusts how sharp edges appear in the
picture
• Brightness – Adjusts the image brightness
• Contrast – Adjusts the image contrast
• Chroma Level – Adjusts how saturated colors
appear
• Hue – Adjusts the overall color balance
between red and green
• Chroma Delay – Compensates for misalign-
ment of the Y (brightness) and the C (color)
components
• Gamma – Adjusts the brightness of the darker
images in the picture
• Black Setup – Corrects floating black color
• Lip Sync – Adjusts the time lag between the
audio signal and the video signal from 0 to 200
msec in 10 msec steps
• Initialize – Returns to the default values
5Press ENTER to save your changes.
Note
•Pressing DISPLAY while the VIDEO ADJUST-
MENT screen is displayed shows one adjust-
ment item, as given below, so that you can
adjust the item while confirming its effect.
Pressing DISPLAY again returns to the former
setting.
• The Lip Sync only works for analog sound. It
does not work for digital output/HDMI/i.LINK
output.
• Chroma Delay will not operate in Composite
Video out, S2 Video out and COMPONENT
Video out when Interlace is selected.