Filter
Top Products
6DVD Setup Menu
41
English
Level
• Default setting: Fix
You may want to make this setting if you connected
this player to your amplifier using the 5.1 channel
analog outputs.
Under the default setting, all channels are output
at the relative volumes they were recorded at.
Change the setting to Variable, if you want to
adjust the relative volume levels of any of the
speakers. Adjustment is in the range of -6dB to
+6dB, in steps of 0.5dB.
•When you set it to Variable, the overall output
level may sound quieter than when set to Fix.
This is not a malfunction.
Press ENTER
Press ENTER
Cursor buttons (2/3): Speaker Change
(at manual test tone)
Cursor buttons (5/∞): Output Level
Change
To help you gauge the correct gain levels, set the
Te st Tone to Manual (test tone from just that
speaker) or Auto (test tone from each speaker in
turn), then adjust the gain so that all speakers
appear to be the same volume from your listening
position.
Follow the on-screen displays to select speakers
and set the Output Levels.
• Many AV amplifiers allow you to make similar
settings at the amplifier stage. In this case, set
the output levels at the player or the amplifier,
not both.
•As the test tone plays through a speaker, its
name is highlighted in yellow on-screen.
Remember
•You can't use the test tone function when the
Audio Out setting is 2 Channel (see page 39).
The test tone will not work with the disc tray
open, or while a disc is playing.
• This setting cannot be chosen when i.LINK is
connected or when HDMI is connected while
either Auto or Multi PCM selected for the
HDMI audio setting. (pages 54, 55)