Filter
Top Products
37
NET ENABLE:
This option selects either enable or disable for the Ethernet communication port.
OFF: Disables it.
ON: Enables it.
NET DHCP:
This option selects enable or disable for the DHCP communication function.
OFF: Disables it.
ON: Enables it.
NOTE: If provided with a DHCP server, the DVR can get an IP address automatically by
setting this option to ON.
NET IP:
This option is used to configure the Ethernet communication settings. This is required for the
purpose of making a network connection (Refer to Section 9). Please consult with a qualified MIS
professional to configure it.
IP: XXX.XXX.XXX.XXX
MASK: XXX.XXX.XXX.XXX
GATEWAY: XXX.XXX.XXX.XXX
FTP SETTING:
This entry allows users to set the FTP (File Transfer Protocol). With an active FTP account, a
user would be able to send still frames from the DVR in intervals to a folder saved inside their
FTP account for later remote viewing.
ENABLE:
This option is to select enable or disable for the FTP function.
ON: Enables it.
OFF: Disables it.
COMM SETTING
COMM ID : 01
RS232 : ON
RS485 : ON
NET ENABLE : OFF
NET DHCP : OFF
NET IP : SET
FTP SETTING
MAIN PAGE
NAS FTP RECORDING
FTP SETTING
ENABLE : OFF
REC MODE : ALARM REC
REC RATE : 1 F / 1 S
ACCOUNT : SET
MAIN PAGE
SET FTP ON / OFF