Filter
Top Products
54
9.2.3 Set IP Address
You don’t need to set a NET IP for the unit if the LAN which the unit is connected to has a
DHCP server. Otherwise, please follow the instructions given below:
Use the “
^
” and “v” buttons , and , to highlight the NET IP. Press the Enter butto n to
enter the NET IP page
1.
Set the IP, MASK and GATEWAY. Then press the Enter button to proceed. The following is
a sample setting.
IP: 192.168.0.1
MASK: 255.255.255.0
GATEWAY: 0.0.0.0
9.3 TCP/IP Communication Software
NOTE: The following guidelines were designed specifically for Windows 98. Your specific
operating system may vary slightly from this navigation. For more TCP/IP installation
information on your system, consult the help section in the START menu of your computer.
Follow the instructions below to install the TCP/IP communication program into your computer for
Windows 98.
?? Click the Start Menu from your computer, and point to the Settings/Control panel.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
COMM ID : 01
RS232 : ON
RS485 : ON
NET ENABLE : ON
NET DHCP : ON
NET IP : SET
FTP SETTING
MAIN PAGE
SET ETHERNET