Filter
Top Products
61
11. Network Viewer and Image Viewer
This section provides instructions for installing and using the Network Viewer and Image Viewer, which are
included with the DVR. It will also discuss remote viewing without the software package. These programs
can be operated by a selected PC equipped with the following requirements.
1. Intel Pentium 233MHz (minimum).
2. 32 MB RAM
3. Window 95, 98, NT, ME, or XP.
4. 4 MB Video card capable of 24-bit true color display.
5. 5 MB free hard disk space for software installation.
6. 10-base T network for LAN operation.
11.1 The Network Viewer
11.1.1 Introduction to Network Viewer
The Network Viewer allows you to potentially access 16 units of the DVR from a remote desktop or a laptop
in a TCP/IP networking environment. It can perform the following functions.
??
View live images from the DVR
?? Store, search, and review recorded video from the DVR HDD.
??
Change the regular record, event record, and timer properties.
Before you are ready to view images from a desktop, you need to have your DVR networked by obtaining a
10 base Ethernet data cable (Standard RJ-45) to connect the DVR to your LAN/WAN. Now enter the main
menu to set the IP address.
RJ-45 PIN configuration for Ethernet
PIN NO. PIN Assignment
1. TX +
2. TX -
3. RX +
4. Not Connected
5. Not Connected
6. RX -
7. Not Connected
8. Not Connected
DVR SLD240
PC
RJ-45
1 2 3 4 5 6 7 8
RJ-45 socket