Filter
Top Products
62
Physical specification for Ethernet
Wire Type Cat. 5
Connector Type RJ-45
Max. Cable Length 30 m
Hub Wiring Configuration Straight Through
PC Wiring Configuration Cross Over
11.1.2 Install the Network Viewer in your PC
Install the Network Viewer automatically from the supplied Network Viewer CD.
1. Exit all applications currently running on the selected PC.
2. Insert the supplied CD in the CD-ROM drive. The program will execute the installation automatically.
Follow the on-screen instructions to proceed with the rest of the installation procedure.
3. After the installation is complete, pop up the START menu from your computer, and point to
Program s / security labs NetViewer to open up the program selection page as shown below. Click
the Network Viewer tag to start the Network Viewer program .
Install the Network Viewer manually.
1. Click the START button.
2. Click on RUN.
3. In the RUN menu, choose BROWSE.
4. Locate your CD-ROM drive and open the folder.
5. Open the file SETUP (setup.exe)
6. After the installation is complete, pop up the START menu from your computer, and point to Programs
/ security labs NetViewer to open up the program selection page as shown below. Click the
NetViewer tag to start the program.
NOTE: Please make sure the TCP/IP communication software has been properly set and
configured in your computer.