Filter
Top Products
67
11.1.4 Change the Record & Timer Properties Via the Network
Follow the instructions below to reconfigure the record and schedule recording settings via the
network.
A.
Set the regular record options
1. When in the Single DVR/Multiplexer mode, click to enter the SETUP page. (See the sample
screen as in A above)
2. Select a desired recording rate and quality from the corresponding drop-down list.
3. Click the OK tag to proceed.
Set the Alarm record settings
1. When in the Single DVR/Multiplexer mode, click to enter the SETUP page. (See the sample
screen as in A above)
2. Set the ALRM SETTING to ON to enable the drop-down list in the ALARM SETTING area.
3. Select a desired recording rate and quality from the corresponding drop-down list.
4. Click the OK tag to proceed.
Set the record timer
1. When in the Single DVR/Multiplexer mode, click to enter the SETUP page. (See the
sample screen as in A above)
2. Set the RECORD TIMER to ON to enable the RECORD TIMER setting area. The MODIFY button
will appear.
3. Click the MODIFY button to set the schedule for recording for each day. (See the sample screen
below) Go to both the START TIME & END TIME boxes , enter a specific Hour: Minute and click
OK to return to the SET UP page.
4. When all required settings are completed, click OK to proceed.