Mitsubishi Electronics HS-HD1100U VCR User Manual


 
30
6 Day will flash. Press the ADJUST buttons to choose the day on which you
want to record; for example, Monday the 11th.
Your choices are:
a single day up to one month away.
every day from Monday through Friday; for example, to tape a soap opera.
To program, press the ADJUST buttons until Monday-Friday appears.
the same day every week; for example, to tape your favorite weekly sitcom.
To program, press the ADJUST buttons until Every and the desired day of the
week appears.
Press ENTER once you have made your choice.
7 The hour numbers of the start time will flash. Press the ADJUST buttons to set
the hour when recording is to start. Press ENTER.
8 The minute numbers of the start time will flash. Press the ADJUST buttons to
set the minutes when recording is to start. Press ENTER.
9 Set the stop time the same way as the start time, using steps 7 and 8.
10 Press the ADJUST buttons to set the recording speed:
SP = standard play; EP = extended play; AUTO = auto.
Auto speed programming is discussed on page 35. Press ENTER.
IMPORTANT
If you press ENTER when you set the timer recording incompletely, Current
Program is not completed will appear on your screen.
If two programmed recording times overlap, VCR is already programmed for
that time will display on your screen for about 3 seconds, and then the Recap
screen will appear. The program you have just set will be highlighted in
magenta color and flash for 3 seconds. The start and stop time of the
overlapped program will be highlighted in cyan color. You will need to erase
one of them.
11 The programmed memory will appear on the Recap screen.
12 To program additional recording times, select an empty program line by
pressing ADJUST buttons. Press ENTER. The VCR Plus+ system menu will
appear. Continue the programming procedure from step 4.
13 When you are finished with all programming, check the following:
Leave an integrated HDTV or an IEEE 1394-equipped HDTV receiver turned
ON.
Turn the VCR power OFF and make sure the programmed recording light is lit.
IMPORTANT
While the VCR is recording a digital broadcast, please do not change the
channel on an integrated HDTV or an IEEE 1394-equipped HDTV receiver.
The menu or the program list of an integrated HDTV or an IEEE 1394-
equipped HDTV will be recorded if it is displayed during recording.
If you record a digital broadcast in VHS format, the picture quality will not be
as clear as that of the original digital broadcast.
If you record a copy protected digital program, the copy protect data will also
be recorded.
Timer Recording
¬Program to record
ƒChannel External L1
ƒDay Monday 11
ƒStart time 11:00am
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
ƒChannel External L1
ƒDay Monday 11
ƒStart time 11:30am
ƒStop time 1:30pm
ƒRecord speed SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
¬Program to record
CH DAY ON OFF
10 TH14 9:00pm 10:30pm SP
§ L1 MO11 11:30am 1:30pm SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
ƒChannel External L1
ƒDay Monday 11
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select