5
IMPORTANT
You must use one of the connections shown on page 5 and 6 in order to record television or cable programs.
Hooking Up Your VCR
VHF
UHF
VHF/UHF
ANTENNA
OUT
IN
x
x
x
x
VCR Rear Panel
TV Rear Panel
OR
Optional
UHF/VHF Splitter
Optional 300 Ohm to 75 Ohm
Matching Transformer
Optional UHF/VHF Combiner
OR
supplied
coaxial cable
OR
From Antenna or
Cable wall outlet
VHF/UHF
VHF
UHF
IN
OUT
ANTENNA
OUT
IN
TV Rear Panel
VCR Rear Panel
OR
From Cable
wall outlet
Cable Box Rear Panel
coaxial cable provided
by cable company
supplied coaxial cable
Antenna or Cable System
without Cable Box
Connecting Antenna or Cable
1 Connect antenna or cable from wall outlet to
ANTENNA IN of the VCR.
2 Connect VCR ANTENNA OUT to the TV’s
Antenna jacks (varies by TV).
3 If your TV has audio video inputs, continue with
the connections on page 7. If not, plug in power
cords of VCR and TV.
Antenna or Cable System with
Cable Box
Connecting Cable and Cable Box, if all
channels are scrambled
1 Connect cable from wall outlet to CABLE IN on
the cable box.
2 Connect OUT (or OUT TO TV) on the cable box
to ANTENNA IN on the VCR.
3 Connect ANTENNA OUT on the VCR to the
TV’s antenna jacks (varies by TV).
4 If your TV has audio video inputs, continue with
the connections on page 7. If not, plug in power
cords of VCR, TV, and cable box.
If your cable company scrambles all of its channels,
you cannot record one channel while watching
another.
If your cable company only requires the use of a
cable box for some channels, connect the cable box
as shown on the next page.
IMPORTANT
Your TV Owner’s Guide may have additional suggestions for antenna/cable hookups.
If your TV has more than one antenna jack, ask your Mitsubishi dealer for advice on additional accessories.