Filter
Top Products
41
Editing Features
R
AUDIO
VIDEO
OUT
OUT
L
R
L
R
L
RECORDING
AUDIO OUT L
AUDIO OUT R
AUDIO IN R
AUDIO IN L
VIDEO IN
VIDEO OUT
HS-HD1100U PLAYBACK
Using the HS-HD1100U to Playback to Another VCR
1 Connect one stereo audio cable to AUDIO IN L and R
on the recording VCR, and to AUDIO OUT L and R on
the HS-HD1100U.
2 Connect a yellow video cable to VIDEO IN on the
recording VCR and to VIDEO OUT on the HS-HD1100U.
3 Set the audio monitor on the HS-HD1100U to
Stereo.
If the other VCR is mono VCR, set the audio monitor
on the HS-HD1100U to Mono. See Selecting and
adjusting the audio and video functions on page
27.
4 Set the input of the recording VCR to External.
5 Put a blank tape into the recording VCR.
6 Put the tape you want to copy into the HS-HD1100U
and find the cue point.
7 On the recording VCR, press REC, then PAUSE.
8 On the HS-HD1100U, press PLAY, then PAUSE.
9 Press the PAUSE buttons on both VCRs at the
same time to begin copying the tape.
10 Press STOP on both VCRs when you are finished.