52
Location of Controls
Remote Control
VCR POWER
Turns the VCR On or Off. If you have programmed the
VCR to record, you need to turn the VCR off.
EJECT
Ejects a tape.
CHANNEL Up and Down
Selects next higher or lower channel in the VCR’s or TV’s
channel memory.
VOLUME Up and Down
Raises and lowers the sound of the TV (Operates the TV only).
TV POWER
Turns the TV On or Off. You need to program your
remote to operate your particular brand of television.
MUTE
Turns off the TV sound. Press again to restore the TV
sound to its previous volume. (Operates the TV only)
Number buttons
Selects TV stations, enters PlusCode numbers.
Sets quick search (CM skip) time.
QUICK PROGRAM/VCR Plus+
Goes to VCR Plus+ system menu.
Exits the programming screen.
INPUT
Selects between the antenna and any other video
equipment that may be connected.
PLAY
Plays a tape.
REW
Rewinds a tape or reverse searches.
FF
Fast forwards a tape or fast forward searches.
STOP
Stops a tape.
REC
Starts recording. While recording, adds manual index mark.
PAUSE
Pauses a tape when recording.
Freezes a frame when playing a tape.
DISPLAY
Displays on the TV screen:
• Time elapsed on the tape
• Time left on the tape, current time
• Channel number and audio reception mode
• Audio channel(s) selected
• Source supplying the VCR with a signal
• If the VCR is stopped, playing, or recording
Turns the Child Lock on and off.
213
546
879
0
CHANNEL
EJECT MUTE
VOLUME
VCR
POWER
TV
POWER
CM SKIP
QUICK PROGRAM
INPUT
VCR Plus+
PLAY
STOP
REW FF
DISPLAYPAUSE
IEEE 1394
INPUT
REC
INDEX
AUDIO/VIDEO
MENU
VCR/TV SP/EP
ADJUST
CANCEL ENTER
ADJUST
VCR
TV
IEEE 1394 INPUT
Selects an integrated HDTV, an IEEE 1394-equipped
HDTV receiver or a D-VHS VCR connected to the VCR.
VCR/TV slide switch
Operates the VCR when set to the VCR position, the TV
when set to the TV position. You need to program your
remote to operate your particular brand of television.
INDEX I
\\
\\
\,
^^
^^
^I
Begins index search forward and backward.
Controls the playback speed of a tape.
AUDIO/VIDEO
Selects the audio and video settings to be adjusted.
MENU
Displays the menus. Exits the menus.
CANCEL
Cancels selections on the on-screen menus.
Resets the counter display to “0H00M00S”.
ENTER
Enters selections on the on-screen menus.
ADJUST +, –
Selects and adjusts menu selections.
VCR/TV
Switches between the VCR’s picture and the TV’s tuner.
SP/EP
Changes the recording speed (SP is standard play; EP is
extended play).