Mitsubishi Electronics HS-HD1100U VCR User Manual


 
39
Editing Features
IEEE 1394-equipped
HDTV receiver
integrated HDTV
OR
IEEE 1394
INTERFACE
HS-HD1100U PLAYBACK
RECORDING VCR
IEEE 1394
INTERFACE
IEEE 1394
INTERFACE
L
R
L
AUDIO OUT L
AUDIO OUT R
AUDIO IN R
AUDIO IN L
VIDEO IN
S-VIDEO IN
VIDEO OUT
S-VIDEO OUT
R
Use either a video cable or
an S-video cable.
Do not use both.
Copying a Tape from D-VHS to Analog
To copy a tape from D-VHS to analog format, use the HS-HD1100U as a playback VCR and connect to an integrated
HDTV or an IEEE 1394-equipped HDTV receiver with an IEEE 1394 cable. And then connect an integrated HDTV or an
IEEE 1394-equipped HDTV receiver to the recording VCR with an S-video/video and audio cable. The digital signal
which is played back on HS-HD1100U will be changed to analog signal by an integrated HDTV or an IEEE 1394-
equipped HDTV receiver, and this analog signal will be sent to the recording VCR to be recorded.
1 Connect an IEEE 1394 cable to IEEE 1394
INTERFACE on an integrated HDTV or an IEEE
1394-equipped HDTV receiver and to IEEE 1394
INTERFACE on the HS-HD1100U. You can use
either of the two IEEE 1394 INTERFACE terminals.
2 Connect the audio cable to AUDIO OUT L and R on
an integrated HDTV or an IEEE 1394-equipped HDTV
receiver and to AUDIO IN L and R on the recording
VCR.
3 If the recording VCR is S-VHS, connect an S-video
cable to S-VIDEO OUT on an integrated HDTV or an
IEEE 1394-equipped HDTV receiver and to the
recording VCR.
If the recording VCR is standard VHS, connect a
video cable to VIDEO OUT on an integrated HDTV or
an IEEE 1394-equipped HDTV receiver and to the
VIDEO IN on the recording VCR.
4 Select the external input of the recording VCR.
5 Put a blank tape into the recording VCR. If you want
to record in S-VHS, be sure to use an S-VHS tape.
6 Put the tape you want to copy into the HS-HD1100U
and find the cue point. Press STOP if the picture
starts playing.
7 On the recording VCR, press REC, then PAUSE.
8 On the HS-HD1100U, press PLAY, then PAUSE.
9 Press the PAUSE buttons on both VCRs at the
same time to begin copying the tape.
10 When finished, press STOP on both VCRs.
IMPORTANT
The picture quality of the copied program will not
be as clear as that of the original digital
broadcast.
Digital programs with copy restriction or
programs prohibited from copying cannot be
copied.