Mitsubishi Electronics HS-HD1100U VCR User Manual


 
33
Timer Recording
VCR Plus+
®
System Programming
The VCR Plus+ system allows you to program your VCR to record by simply
entering a PlusCode programming number. You can find this number in TV Guide
or possibly your local TV listings.
1 Load a tape with its erasure prevention tab intact into the VCR.
2 Press MENU. VCR Main Menu appears on your screen. Use the ADJUST
buttons to select Program to record. Press ENTER.
IMPORTANT
If the VCR memory is full, Program memory is full will appear for 3 seconds,
and then the Recap screen will appear. Use CANCEL to erase an entry
before you can add another one.
If there is at least one programmed recording already entered, the Recap
screen will appear. Wait 4 seconds, and the VCR Plus+ system menu will
appear.
3 VCR Plus+ system menu will appear. Use the number buttons on the remote
control to enter the PlusCode number for the television show you want to
record. For example, if the PlusCode number for the program you want to
record is 5678, simply enter 5-6-7-8. See your local newspaper or TV Guide
for PlusCode numbers.
4 If you enter a number incorrectly, press CANCEL. When you have finished
entering the PlusCode number, press ENTER.
IMPORTANT
If the code number you entered is wrong, The PlusCode number is not valid
will display on the screen for 3 seconds and then the VCR Plus+ system
menu will reappear.
5 Use the ADJUST buttons to select whether you want to record your program
once, daily, or weekly.
Once will record a program one time.
Daily will record the same channel at the same time, Monday through Friday.
Weekly will record the same channel at the same time, on the same day
each week.
After you have made your choice, press ENTER.
IMPORTANT
If two programmed recording times overlap, VCR is already programmed for
that time will display on the screen. You will need to erase the previous
program before you can enter the new one.
6 Recap screen will appear. The program you have chosen to record will be
highlighted.
The channel number will appear in white color. Make sure that the correct
channel number is shown on the screen. If the displayed number is not
correct, press INPUT to make the number flash, then press the ADJUST
buttons to correct the channel number. Press the ENTER to complete.
¬Program to record
CH DAY ON OFF
§ 2 MO11 11:30am 1:30pm SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
INPUT to correct channel
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
ªVCR Main Menu
¬Program to record
ƒ1394 connection list
√Customize choices
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select 
¬VCR Plus+ system
Use number keys to enter
the PlusCode number
5678----
Press ENTER when done.
Press CANCEL to erase
the PlusCode number.
Press MENU to go back.
¬VCR Plus+ system
PlusCode number:5678
ƒOnce
ƒDaily
ƒWeekly
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select