Mitsubishi Electronics LT-46153 Flat Panel Television User Manual


  Open as PDF
of 96
 
50 4. TV Menus
Inputs
Name
Cablebox, Cam(corder), CD, DVD
(DVD, DVD2, Blu-ray), DVR, Game
(Game, PS, Xbox, Wii), MP3 Player,
PC, Satellite, VCR, AVR
Delete (deactivatedHDMIonly)
On/Off (ANTonly)
Letsyouassignor• changenamesofinputsappearingin
theActivitymenu.
Press-  tomovebetweeninputs.
Press- toselectaname.
Youcannotchangethenameofthecurrentinput;you-
mustfirstswitchtoanotherinput.Ifyouhaveonlyone
input,suchasacablebox,makesuretheAntinputis
OnandswitchtoAntennaintheActivitymenubefore
renamingthesingleinput.
Letsyouturnthe• AntinputOn/Off(todisplay/hideitintheActiv-
itymenu).
LetsyoudeleteunusedHDMIinputsfromthe• Activitymenu.
ACEC-enabledtunercanbenamedeither•
Cable Box
or
Satellite
.
ACEC-enabledDVDplayercanbenamed•
DVD
,
DVD2
,or
Blu-ray.
General Notes
WhenyouchangeaninputnameintheNamemenuandthenexittheNamemenu:
Thenameischanged•
Theiconinthe• Activitymenuischanged
Audioandvideosettingsarechangedtothedefaultsforthenewdevicetype.•
153 and 249 Series:• AllpreviousNetCommandIR“learning”fortheinputiserased.
Notes for HDMI devices
Disconnecting an HDMI device:• WhenyoudisconnectanHDMIdevice,theiconremainsintheActivitymenuuntil
youremoveit.SelectDeleteintheInputs > NamemenutoremoveanunwantediconforanHDMIinput.
Ifthe• New Device FoundscreendoesnotdisplayasexpectedwhenyouconnectanHDMIdevice,seethe
resetinstructionsunder“ReactivatingAutoSensingforanHDMIInput,”page13.
HDMI Control and CEC-Enabled Devices:• SeeAppendixB,“HDMIControlofCECDevices,”page75.
If case of CEC conflicts:• TurnoffCECsignalsinoneoftheseways:
TurnofftheTV’sHDMIControlsignalstothedevice(seebelowfor- HDMI Control).
Turnoffeachdevice’sinternalCECcapability.-
SeeAppendixBfortheTV’sHDMIControlor,toturnon/offaspecificdevice’sresponsetoCECsignals,see
thedeviceowner’smanual.
Learn
153
and 249 Series
SetsuporchangesNetCommandIRcontrolofthecurrentviewingdevice.
See“AboutNetCommandIRControl,”page55.
AVR
153 and 249
Series
SetsuporchangesNetCommandIRcontrolofanA/Vreceiver.
See“NetCommandIRControlofanA/VReceiver”onpage61.
HDMI Control On, Off SelectOnorOfftoenableordisabletheTV’scontrolofaCEC-enableddevice.
SeeAppendixBforuseofthisfeature.
Activity Letsyou• customizetheActivitymenuchoicesforthecurrentinput.
Highlighttheactivitynameandpress•
ENTER
tomakechanges.
See• “HowistheActivityMenuGenerated?”ontheoppositepage.
Downloaded From TV-Manual.com Manuals
 previous next