Filter
Top Products
24
If the VCR displays the wrong time
1 Follow the procedure on the previous page to step 3. Then turn the SHUTTLE
ring to the right.
2 You will see the Set the clock menu. Channel will be highlighted. If you know
the channel that carries a time signal, turn the ADJUST dial to enter the
channel. Most PBS stations broadcast a time signal. For the quickest
response, enter your local PBS station. If you don’t know it, leave the channel
setting at AUTO. Turn the SHUTTLE ring to the right.
3 Time zone will be highlighted. Turn the ADJUST dial to select the time zone of
your area. Available time zones are: Atlantic, Eastern, Central, Mountain,
Pacific, Alaska, and Hawaii. Turn the SHUTTLE ring to the right.
4 Daylight savings will be highlighted. Turn the ADJUST dial to select AUTO, ON
or OFF. If you follow daylight saving time, select ON. If not, select OFF. If you
select AUTO, the VCR automatically sets the daylight saving time.
5 To activate the auto clock function, turn off the VCR.
Setting the Clock Manually
Skip this section if your VCR has set the clock correctly using ALLSET or the auto
clock function.
1 Press MENU on the remote control. You will see the VCR Main Menu.
2 Turn the ADJUST dial to select First Time Set-Up. Turn the SHUTTLE ring to
the right. First Time Set-Up menu will appear. Turn the ADJUST dial to select
Set the clock. Turn the SHUTTLE ring to the right.
3 You will see the Set the clock menu. Clock set will be highlighted. Turn the
ADJUST dial to select MANUAL. Turn the SHUTTLE ring to the right.
4 Daylight savings will be highlighted. Turn the ADJUST dial to select ON or
OFF. If you are currently following daylight savings, select ON. Otherwise,
select OFF. Turn the SHUTTLE ring to the right.
≈Set the clock
ƒChannel (065)
ƒTime zone (AUTO)
ƒDaylight savings(AUTO)
To activate Auto Clock,
turn off the VCR.Ł
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
≈Set the clock
ƒChannel (065)
ƒTime zone (Eastern )
ƒDaylight savings(AUTO)
To activate Auto Clock,
turn off the VCR.Ł
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
≈Set the clock
ƒChannel (065)
ƒTime zone (Eastern )
ƒDaylight savings(AUTO)
To activate Auto Clock,
turn off the VCR.Ł
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
≈Set the clock
ƒClock set (MANUAL)
ππππππππππππππππππππππππŁ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
≈Set the clock
ƒDaylight savings (OFF)
ƒMonth --
ƒYear --
ƒDate --
ƒTime --:--Ł
ππππππππππππππππππππππππŁ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
Setting Up Your VCR