Filter
Top Products
33
Selecting S-input Setting
To watch the picture from other equipment through the VCR, you have to select the
S-video input jack or video input jack that matches the equipment. If you connect
the satellite receiver to the VCR with an S-video cable, you have to set Rear S-
input to ON.
1 Press MENU on the remote control. VCR Main Menu appears.
2 Turn the ADJUST dial on the remote control to select S-VHS Set-Up. Turn the
SHUTTLE ring to the right.
3 Turn the ADJUST dial to select Front S-input if you use the front panel jacks, or
select Rear S-input if you use the rear panel jacks.
4 Turn the SHUTTLE ring to the right to select which input jack to input.
• select OFF when you want to input signals from video input jack.
• select ON when you want to input signals from S-video input jack.
5 Press MENU twice to exit the menus.
Using S-through
This function allows you to view the video signal from the equipment connected to
the back of the VCR even when the VCR is off. To use this function, you have to
connect your VCR and TV, and also connect your VCR and the other equipment
with an S-Video cable. For example, if you connect satellite receiver with an S-
Video cable, you can watch the satellite video signal on your TV with the VCR
power off when you set Rear S-through to ON.
1 Press MENU on the remote control. VCR Main Menu appears.
2 Turn the ADJUST dial on the remote control to select S-VHS Set-Up. Turn the
SHUTTLE ring to the right.
3 Turn the ADJUST dial to select Rear S-through.
4 Turn the SHUTTLE ring to the right to set Rear S-through to ON or OFF.
5 Press MENU twice to exit the menus.
Recording
»S-VHS Set-Up
ƒS-VHS record (AUTO)
ƒS-ET record (OFF)
ƒFront S-input (ON )
ƒRear S-input (OFF)
ƒRear S-through (OFF)
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER to change.
Press MENU to go back.
»S-VHS Set-Up
ƒS-VHS record (AUTO)
ƒS-ET record (OFF)
ƒFront S-input (OFF)
ƒRear S-input (ON )
ƒRear S-through (OFF)
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER to change.
Press MENU to go back.
»S-VHS Set-Up
ƒS-VHS record (AUTO)
ƒS-ET record (OFF)
ƒFront S-input (OFF)
ƒRear S-input (OFF)
ƒRear S-through (ON )
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER to change.
Press MENU to go back.
ªVCR Main Menu
¬Program to record
ƒ1394 connection list
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
Use ADJUST to select,
and ENTER.
Press MENU to exit menus
ªVCR Main Menu
¬Program to record
ƒ1394 connection list
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
Use ADJUST to select,
and ENTER.
Press MENU to exit menus