Filter
Top Products
61
Auto power save (auto-off)
When the Auto Power Save feature is turned on, the VCR will automatically turn off
after remaining idle for 30 minutes. If a control, such as a menu function or chan-
nel selection, is used or if there is a tape playing or being recorded, the VCR will
remain on.
3 Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST dial to select Auto power save. Turn the SHUTTLE
ring to the right to set to ON.
4 Press MENU twice to exit the menus.
IMPORTANT
When viewing analog broadcast stations through the VCR, 3minutes>Power
off will appear on the TV screen three minutes before the VCR power turns
off. The display will count down the number of minutes until the VCR turns
off. If you want to continue using the VCR, press any of the buttons.
RF converter
If your TV has audio and video inputs, turn the RF converter OFF. If your TV does
not have audio and video inputs, keep the RF converter set to ON. It is preset by
the factory to ON.
3 Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST dial to select RF converter. Turn the SHUTTLE
ring to the right to select ON or OFF.
4 Press MENU twice to exit the menus.
IMPORTANT
If the RF converter is set to ON, you aren’t required to press VCR/TV to play
a tape or to use VCR menus. The VCR light will automatically light up when
you press PLAY or MENU. Be sure to set the TV to the video channel (see
page 13).
PerfecTape
®
PerfecTape
®
is an exclusive Mitsubishi feature that tests the quality of video tapes
you will record on. After each test, the VCR will adjust its internal circuitry in order
to make the best possible recording on your tape.
setting up PerfecTape
®
You can set up PerfecTape
®
to function two ways.
If you want the VCR to automatically test any non-recorded tapes when the tape is
loaded, select AUTO.
If you do not want the VCR to automatically test tapes, select MANUAL.
PerfecTape
®
will now function only when you start a test. Any tape with the erasure
prevention tab intact can be manually tested.
It will not automatically test recorded tapes – you must choose to test those your-
self.
3 Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST dial to select PerfecTape.
4 Turn the SHUTTLE ring to the right to set PerfecTape to AUTO or MANUAL.
5 Press MENU twice to exit the menus.
√Customize choices
ƒVideo mute (ON )
ƒAuto power save (OFF)
ƒRF converter (OFF)
ƒPerfecTape (AUTO)
Go to next page §
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER to change.
Press MENU to go back.
√Customize choices
ƒVideo mute (ON )
ƒAuto power save (OFF)
ƒRF converter (ON )
ƒPerfecTape (AUTO)
Go to next page §
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER to change.
Press MENU to go back.
√Customize choices
ƒVideo mute (ON )
ƒAuto power save (ON )
ƒRF converter (OFF)
ƒPerfecTape (AUTO)
Go to next page §
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER to change.
Press MENU to go back.
Advanced Features