Filter
Top Products
10
4. Slide the battery cover back on.
After a few seconds, the remote controller
starts up automatically and beeps twice to
indicate that it has finished starting up.
5. Plug the power adapter into a wallet
outlet and connect it to the
recharging dock.
Optional recharging dock
Warning:
Use the recharging dock only with the NiMH
rechargeable battery pack of BCC-5.
1. Slide the battery cover off the back of
the remote controller.
2. Remove the plastic AA battery tray
from the battery compartment.
Introduction
3. Insert the battery pack (included with
the recharging dock) as indicated on
the side of the battery pack.
6. Place the remote controller on the
recharging dock.
Recharging starts automatically. The light on
the front of the recharging dock indicates
charging takes place. When the battery pack
is fully charged, the light goes off.
Notes:
• You can operate the remote controller while it
is being charged.
• Normal charging time is 2 to 3 hours,
depending on the condition of the battery
pack.
When the battery pack is running low, the Low
Battery icon
blinks at the center top of the
display. Recharge the batteries as soon as possible
to ensure perfect performance.
Note:
The remote controller retains all settings when the
battery pack has run out. You will only have to
reset the clock.