Onkyo USR-5RF Universal Remote User Manual


 
27
Getting the Maximum out of it
4. Adding and Moving Devices
Adding devices
If you have a device that is not provided in the
Device menu, you can add it to the remote
controller.
You cannot add devices to the Home menu
directly. You have to add them by using the
Device menu.
1. Make sure the device tab is active.
The device tab is active when the name of a
device is displayed.
2. Switch to add mode by using the
Mode button.
The remote controller displays the following
choices:
Add New Device: Choose this option to
add a completely new device.
Copy Existing Device: Choose this option
to copy a device already provided in the
Device menu (for example for a second
television).
Restore Deleted Device: Use this option to
restore a device you have deleted.
3. Tap the device you want to add in the
Device menu.
Note:
If the device you want to add is not provided,
choose a similar one. You can customize it
later.
The remote controller gives you the
possibility to add the device with or without
RC-codes.
Add by RC-codes: Choose this option if
you think the new device understands RC-
codes. The new device is added with
operational buttons.
Dont add RC codes: If you choose this
option, the new device is added without
operational buttons. You can program
them as described in Programming
control panel buttons on page 23.
4. Tap the button of your choice.
The new device is automatically displayed in
Use mode.
Moving menu items
You can change the order of Device menu items
and Macro menu items. Changes you make in the
Device menu are automatically updated in the
Home menu.
1. Make sure the device tab is active.
or
Make sure the macro tab is active.
The device or macro tab is active when the
name of a device or macro is displayed.
2. Switch to Move mode by using the
Mode button.
The remote controller displays the menu.
3. Tap the menu item of your choice.
The menu item is highlighted.
4. Use the Left and Right button to move
the menu item up or down.
5. Tap Accept to save the changes.
You return to Use mode.