Filter
Top Products
34
Changing the remote controller’s
RF IR Settings
All devices are set up by default to work with IR
signals. To be able to operate one or more devices
with RF signals, you have to change the remote
controller’s RF IR settings for those devices.
1. Make sure the Device tab is active.
The Device tab is active when the name of a
device is displayed at the right side of the
touch screen .
2. Switch to RF IR mode by using the
Mode button
.
The Device menu appears.
Getting the Maximum out of it
4. Tap RF.
The RF IR settings for the selected device are
transferable from IR to RF.
When you have only one RF Receiver, you can
accept the default settings for the Extender ID and
the Channel. Continue with step 5.
or
When you have several RF Receivers to operate
devices, you have to assign the correct Extender
ID to the selected device. Follow the instructions
as described in “Changing the Extender ID”.
3. Select the device for which you want
to change the RF IR settings.
The RF IR settings appear. The white label on
the button
indicates that the selected
device is currently operated with IR signals.
Note:
The ID on the RF Receiver has to match the
Extender ID on the remote controller.