Filter
Top Products
113
RQT9434
Reference
The contents of the card cannot be read.
¾ Remove the card from the slot and then insert again. If this
does not solve the problem, turn off and turn on the unit again.
¾ The card format is not compatible with the unit. (The contents
on the card may be damaged.) (> 11)
¾ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format.
¾ The card contains a folder structure and/or file extensions that
are not compatible with this unit. (> 117)
¾ You can use SD Memory Cards with capacities from 8 MB to
2 GB and SDHC Memory Cards with capacities from 4 GB to
32 GB.
Copying, deleting and setting protection takes a
long time.
¾ When there are a lot of folders and files, it may sometimes take
a few hours.
¾ When repeating copying or deleting, it may sometimes take a
long time. Format the disc or card. (> 85)
Still pictures (JPEG) do not playback normally.
¾ The images that were edited on the PC, such as Progressive
JPEG, etc., may not play back. (> 116)
Tracks could not be copied to the HDD.
¾ If there are copyright protected tracks such as SCMS
restrictions, they will not be copied.
¾ Recording from CDs that do not conform to CD-DA
specifications (copy control CDs, etc.) cannot be guaranteed.
¾ Bonus tracks may not be copied.
Title of the newly released CD cannot be
acquired.
¾ Title cannot be acquired if the title is not registered in the built-in
Gracenote
R
database. Connection to the network is necessary
to acquire title for the newly released CD. (> 103)
ID3 tag of a MP3 file is not completely displayed.
¾ Only the track name and artist name can be displayed with this
unit.
The contents of the USB memory cannot be read.
¾ Remove the USB memory from the USB port and then insert
again. If this does not solve the problem, turn off and turn on the
unit again.
¾ Check that the USB memory is inserted correctly. (> 15)
¾ The format of the USB memory or of its contents is not
compatible with the unit. (The contents on the USB memory
may be damaged.) (> 11)
¾ The USB memory contains a folder structure and/or file
extensions that are not compatible with this unit. (> 117)
¾ USB memories connected using a USB extension cable or a
USB hub may not be recognized by this unit.
¾ Some USB memories cannot be used with this unit. (> 11)
¾ If inserted during playback, recording or copying etc., the USB
memory may not be recognized by this unit.
¾ You can use USB memories with capacities up to 128 GB.
USB memory cannot be operated.
¾ Turn the power of this unit off once, and turn it back on. If it
cannot be operated after that, set “VIERA Link” to “Off” and turn
the power of this unit off again, and turn it back on. (> 93)
The TV Guide System does not receive any data.
¾ Check whether the clock is properly set. (> 95)
¾ If signal quality is bad (ghost images or limited reception), the
TV Guide system may not be able to receive any data.
The empty field is displayed for some or all
stations.
¾ Some stations are not supported by the TV Guide system.
¾ Programme the Timer recording manually. (> 35)
The TV Guide information is not displayed
properly.
¾ There was a programme change, or TV Guide information from
a broadband cast station was possibly not correctly transmitted.
Check the current programme, e.g. on the Web site for the TV
Guide system provider or station provider.
The TV Guide data transfer was interrupted.
¾ The TV Guide system shows the data that was received up to
the interruption.
¾ The programme information may be incomplete.
The TV Guide data is not updated.
¾ Make sure that the time is set correctly. (> 95)
Digital broadcasts cannot be received.
¾ The dish may not be pointing in the direction of the satellite, or
the direction of the dish may have changed due to strong winds
or vibration. If problem persists consult your local TV aerial
installer.
¾ Reception may be disturbed in bad weather.
¾ To record an encrypted broadcast, a CAM (Conditional Access
Module) with Smart Card valid for the broadcast is required.
TV reception worsens after connecting the unit.
¾ This can occur because the signals are being divided between
the unit and other equipment. It can be solved by using a signal
booster, available from electronics retailers.
The digital channel information does not appear.
¾ Select the length of time (3–10 sec.) in the “On-Screen
Messages” in the Setup menu. (> 92)
¾ The digital satellite channel information will not appear during
playback.
Music
USB
TV Guide
Digital broadcast
DMRBS850&750EG-RQT9434-L_eng.book 113 ページ ２０１０年１月１４日 木曜日 午後４時２１分