Filter
Top Products
72
RQT9434
Playing music
[HDD] [-R] [-R]DL] [CD] [USB]
Operations during play
Useful functions during music play
Stop
Press [∫].
Pause
Press [;].
Press [;] again or [1] (PLAY) to restart play.
Search
Press [6] or [5].
Press [1] (PLAY) to restart play.
Skip
During play or while paused,
press [:] or [9].
Skip to the track you want to play.
≥Each press increases the number of skips.
Register a track to
the “My Favourites”
[HDD]
While Track List screen is displayed
Press [3, 4] to select the track and press the “Green” button.
≥Up to 99 tracks can be registered.
Properties
[HDD]
While Track List screen is displayed
1Press [3, 4] to select the track.
2 Press [OPTION].
3Press [3, 4] to select “Properties” and press [OK].
≥To exit the Properties screen, press [OK].
Repeat Play
Random
1 Press [DISPLAY].
2Press [3, 4] to select “Play” and press [1].
3Press [3, 4] to select “Repeat Play” or “Random” and press [1].
4Press [3, 4] to select the item.
≥Repeat Play
“All”: Repeatedly playback the selected album, etc.
“Track”: Repeatedly playback the selected track
“Off”
≥Random
“On”: Randomly playback the selected album, etc.
“Off”
Re-master 1
Re-master 2
This feature gives you a more natural sound by adding higher frequency signals not recorded on the track.
1 Press [DISPLAY].
2Press [3, 4] to select “Sound” and press [1].
3Press [3, 4] to select “Sound Effects” and press [1].
4Press [3, 4] to select “Re-master 1” or “Re-master 2”.
≥This function is effective for audio from the HDMI terminal or the DIGITAL AUDIO OUT terminal only when
“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or “MPEG” is set to “PCM” (> 91). (However, in this case,
audio is output as 2ch from the DIGITAL AUDIO OUT terminal.)
Display Still
Pictures
(Slideshow)
Sample pictures in this unit or pictures stored on the “Album” of the HDD can be played back as slideshow during
playback of the music.
While playing the music
Press the “Red” button.
Change the pictures to display
1 Press [OPTION].
2Press [3, 4] to select “Select Picture Album” and press [OK].
3Press [3, 4] to select the album and press [OK].
To end the slide show
Press [RETURN ].
≥It will also end when the music is stopped.
Playing music
continuously even
after turning off
power to the
television
When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 or later, the unit is turned
off if the power to the television is turned off, since “Power off link” (> 76) operates.
The following operations make it possible to keep the power of the unit ON and to play music continuously.
1 While playing music
Press [OPTION].
2 Press [3, 4] to select “TV Power Off” and press [OK].
≥Sound may be discontinued for several seconds when the power to the television is turned off.
≥If the operation mentioned above is executed while audio is output from the television, the sound may not be
output from the amplifier/receiver. It is recommended to set the amplifier/receiver beforehand so that audio will
be output from the amplifier/receiver.
Please select the album to start slidshow.
RETURN
OK
While playing music a picture slideshow
can be displayed.
Select Picture Album
Sample Pictures
My Favourites
My Travel
DMRBS850&750EG-RQT9434-L_eng.book 72 ページ ２０１０年１月１４日 木曜日 午後４時２１分