Filter
Top Products
60
RQT9434
Copying from a video equipment (video cassette recorder, etc.)
e.g., Connecting to the AV3 or DV input terminals on the front
≥Turn off the unit and other video equipment before connecting.
§
Connect to terminals of the same colour.
If the audio output of the other equipment is monaural
Connect to L/MONO on the AV3 input terminals at the front.
When recording from the unit’s DV terminal
≥Select the type of audio recording from “Audio Mode for DV Input”
in the Setup menu (> 92).
≥When recording from DV equipment (e.g., digital video
camcorder), you can record audio/video recordings from DV tape
only.
≥When “Rec for High Speed Copy” (> 90) is set to “On” and you
make a copy, the copy will be made using the picture size selected
in “Aspect for Recording” (> 90) of the Setup menu.
16:9 image such as wide broadcasting (> 32)
[Note]
≥If video is copied from another piece of equipment to this unit, then
the video quality will be degraded.
≥While copying from DV input or executing the “Flexible Recording
via AV input” (> 61)
–Copy will stop when timer recording starts.
–Chasing playback, simultaneous rec and play, switching of the
broadcast or input cannot be performed.
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP
Preparation
≥Press [DRIVE SELECT] to select the HDD drive.
≥When recording bilingual programmes, select “M1” or “M2” on the
external equipment.
≥When the output signal from the external equipment is NTSC,
change the “TV System” to “NTSC” in the Setup menu (> 93).
1 While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV3 input terminals, select
“AV3”.
2 Press [REC MODE] to select the
recording mode.
≥DR, HG, HX, HE, HL and FR mode cannot be selected.
3 Start play on the other equipment.
4 When you want to start recording
Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
[Note]
When this unit is in EXT LINK standby (“EXT-L” is shown on the
unit’s display), this function does not work.
DV IN
L/MONO-AUDIO-R
VIDEO
AV3 IN
Audio/Video
cable
§
This unit
Other video equipment
Connect to Audio/Video output terminals.
DV cable
(IEEE 1394, 4-
pin)
Manual recording
Almost all videos and BD-Video/DVD-Video on sale have been
treated to prevent illegal copying. Any software (firmware) that
has been so treated cannot be recorded using this unit.
DMRBS850&750EG-RQT9434-L_eng.book 60 ページ ２０１０年１月１４日 木曜日 午後４時２１分