Filter
Top Products
16
RQT9434
STEP
1
Inserting the CAM (Conditional Access Module) and Smart Card
You need a Conditional Access Module together with a valid Smart Card and a subscription with the corresponding broadcaster.
1 Insert the certified Smart Card into the commercially available CAM (Conditional Access Module).
2 Insert the CAM into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded.
≥You can insert one or two different CAMs with Smart Cards into this unit.
However, it will not operate properly when two CI Plus compatible CAMs are simultaneously inserted.
∫ PIN query
When you turn the unit on after inserting the card, depending on the card provider, a PIN may be demanded.
Enter the 4-digit code with the numbered buttons.
[Note]
≥Be sure to insert the CAM horizontally into the slot.
≥Do not insert the CAM and Smart Card upside down.
≥For more details, see the manual of the CAM and Smart Card, or consult the dealer.
≥The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
≥Unplug the AC mains lead before you insert or remove the CAM with Smart Card. Remove it slowly.
10BASE-T/
100BASE-TX
LNB
LNB
IN 1
IN 1
LNB
LNB
IN 2
IN 2
OPTICAL
COAXIAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AC IN
COMPONENT
VIDEO OUT
OUT
AUDIO
OUT
VIDEO
L
R
Y
R
P
B
P
AV1
(TV)
VIDEO
RGB/S VIDEO
AV2
(EXT)
VIDEO
RGB/S VIDEO
1
2
COMMON INTERFACE
13V/18V
400mA max.
CI (Common Interface) slot
CAM (Conditional Access Module)
Smart Card
This unit’s rear panel
Adjust the position marks.
Label facing upwards
DMRBS850&750EG-RQT9434-L_eng.book 16 ページ ２０１０年１月１４日 木曜日 午後４時２１分