Filter
Top Products
35
RQT9434
Recording
Advanced timer recording
Timer recording of the broadcast
Recording disc: [HDD]
Recording mode: DR
Timer recording from the external equipment connected to AV1, AV2
or AV3
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP, FR
Selection of channel is made easy by creating a Favourite of the
channels you watch often. (> 87, Favourites Edit)
≥You can enter up to 64 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥Turn on this unit.
≥Make sure that the clock settings are correct (> 95).
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Programme” and press [OK].
3 Press [2, 1] to select the items and
change the items with [3, 4].
≥Channel
Select the channel to record.
You can press the “Red” button (Category/AV) to change
“AV input”, “All DVB Channels”, “Free Channels”, “Radio” or
“Favourites1”, etc.
You can perform this operation when you select the box of
“Channel”.
You can also select channel with the numbered buttons.
≥Day/Date
You can select current date up to one month later minus one
day. You can select “Date” or “Weekly” by pressing the
“Green” button only when “Day/Date” is selected. Titles
recorded using the same daily or weekly timer are bundled
and displayed as a “group” in the DIRECT NAVIGATOR
screen (> 41) except when using Auto Renewal Recording.
≥Start/Stop
Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 15-minute increments.
≥Mode
Recording modes and recording contents (> 29)
“XP”, “SP”, “LP”, “EP”, “FR” can be selected when “Channel”
is selected in “AV input”.
It will be fixed to DR mode if anything else is selected.
≥Renew (Auto Renewal Recording) (> 36)
≥Input Name
Press [OK]. (> 80, Entering text)
4 Press [OK].
The timer programme is stored and the timer icon (red) is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
∫ Timer Recording using the TV Guide system
(> 23)
∫ To release the unit from timer recording standby
(> 36)
∫ To cancel recording when timer recording has
already begun (> 36)
∫ About 2 programmes recorded simultaneously
(> 22)
∫ Notes on timer recording (> 37)
[Note]
≥To record an encrypted broadcast, a CAM (Conditional Access
Module) with Smart Card valid for the broadcast is required.
Manually programming timer recording
CH
DEL
Channel Name
Schedule
Drive/Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 0/64
Timer Recording 30:30 DRHDD FRI 23.01.2009 8:59
Delete
New Timer Programme
Timer Recording SAT 10.01 2009 19:1030:24 DR
Channel
1 SAT 10.01
Day/Date
--
Stop
23:10
Start
RETURN
Category/
AV
Date/
Weekly
Input Name
HDD
Drive
DR
Mode
All DVB Channels
[Prog.Name]
ZDF
HDD
Category/AV
Channel Name
Schedule
Drive/Mode
Space
Timer Recording
30:30 DR
HDD FRI 23.01.2009 8:59
New Timer Programme
OK
ZDF
Hunter.\*Episode 5\*
FRI 27.03
22:20 - 22:30
HDD
DR
Check for available space on HDD, etc., when the “!” is
displayed. (> 37)
Timer icon (red)
DMRBS850&750EG-RQT9434-L_eng.book 35 ページ ２０１０年１月１４日 木曜日 午後４時２１分