Filter
Top Products
C662M-E (5/03) 21
VIEWSTATION NETWORK CONFIGURATION
After you make all connections, you also have to configure the network on the viewstation. To configure the viewstation, you
need the following information. You can obtain this information from your network administrator.
• Unique viewstation name: (Examples are Pelcovs1, Pelcovs2, Pelcovs3, etc. This is the default naming scheme.)
• Unique IP address: (Examples are 100.0.0.201, 100.0.0.202, 100.0.0.203, etc. This is the default addressing scheme.)
• Network subnet mask: This must be the same on all recorders and viewstations. (For example, 255.0.0.0 is the default.)
• Computer workgroup name: This must be the same on all recorders and viewstations. (For example, DX9000_GROUP is
the default.)
CHANGING THE VIEWSTATION’S IDENTIFICATION
To change the default computer name or workgroup:
1. Close all windows on the viewstation desktop.
2. Right-click My Computer.
3. Go to Properties and click the Network Identification tab.
Figure 11. Viewstation Network Identification Page
4. Click Properties.