Filter
Top Products
52 C662M-E (5/03)
Motion Detection
1. Click the DVMD tab.
Figure 56. Motion Detection Page
2. Select the “Detector on” radio button.
3. Select the “Preview” checkbox. The video has blue squares over the entire area meaning the entire video has been
selected for motion detection.
4. Click “Clear all” to remove all of the boxes or click the right mouse button on each box you want to remove. To undo your
changes, click “Discard changes.” Click “Mark all” to select the entire video for motion detection.
5. Drag the triangles under the lines to select the minimum time between events and the Video Motion Detection (VMD)
Sensitivity.
6. Click Apply.