Filter
Top Products
C662M-E (5/03) 75
1. Select the channel(s) you want to configure with the data translator.
2. Enter the server name that the data translator is connected to.
3. Select the device number as configured in the I/O Handler.
4. In the port field, enter the alarm number you want to activate in the matrix.
NOTE: In the port field, you can enter and configure only alarm numbers (physical and logical numbers in the CM9760
System Manager). If you select several channels, the port number you enter will be the starting port. That means the first
port on the data translator is 1.
5. Click OK and then Next.
Figure 88. Data Translator Step 4 Screen
6. Select the event type to translate.
NOTE: Do not select “Stop Recording” and “Start Recording.” They are reserved for future use.
7. Select “No translation.” You must always select this.
8. Click OK and then Finish.