Filter
Top Products
C662M-E (5/03) 61
Connecting a Data Translator
To connect a CM9760-DT to a DX9000 recorder:
1. Connect a null modem cable from the CM9760-DT’s COM A port to the COM 1 or COM 2 port on the recorder.
2. Connect a null modem cable from the CM9760-DT’s COM B port to COM 1 or COM 2 port on the CM9760-CC1.
3. Set the jumpers in the data translator for baud rate and parity. Refer to the CM9760-DT Installation/Operation manual.
NOTE: You can also connect the CM9760-DT to one of the CM9760-CC1 SERCOM ports for RS-422 communication.
Figure 65. Connecting a CM9760-DT
NOTE: You can also connect a CM9760-DT to an IDE-compatible recorder.
DX9008F-C
CM9760-DT
CM9760-CC1
USE EITHER
COM 1 OR COM 2
USE EITHER
COM 1 OR COM 2
PRINTER COM 1 COM 2
12
COM A
COM B
12
12 VAC
RS-232 TO RS-422
CONVERTER