Filter
Top Products
62 C662M-E (5/03)
I/O HANDLER CONFIGURATION
ALARM UNIT INTEGRATION
The following steps show how to configure an alarm unit. This programming is required only on the recorder that is physically
connected to the CM9760-ALM.
1. Go to Start > Programs > DX9000 Server > I/O Handler Configuration.
Figure 66. Alarm I/O Handler Configuration
2. Click Select Driver to define the external device driver that is connected to the server.
Figure 67. CM9760 Alarm Driver
3. Select CM9760ALM.dll.
4. Click Open.
Figure 68. Device 1 Alarm Driver
5. Click Configure.