Pelco DX4104 DVR User Manual


 
10 C4631M-A (8/10)
PTZ CONTROL
The PTZ control is available for cameras that support PTZ functions using Pelco P and D protocols. It is also available for supported third-party
dome cameras.
NOTE: When operating third-party cameras, the PTZ control supports the up, down, left, right, zoom in, and zoom out functions.
Figure 3. PTZ Control
Move: Pans and tilts the camera in the direction of the selected arrow.
Exit: Closes the PTZ control.
ZOOM: Zooms the camera in and out.
FOCUS: Adjusts the camera focus.
IRIS: Opens and closes the camera iris.
PRESET NUMBER: Displays the preset number.
Keypad: Use the numeric keypad to enter presets or pattern numbers.
PRESET: Performs two functions:
Preset programming mode: Stores the preset in the selected memory location.
PTZ mode: Activates a preset.
PATTERN: Performs two functions:
Pattern programming mode: Stores the pattern in the selected memory location.
PTZ mode: Activates a pattern.
Clear: Deletes a programmed preset, pattern, or tour.
Program: Accesses the camera programming mode.
Auxiliary: Unsupported at this time.
SET: Performs two functions:
Enters PTZ programming mode.
Exits PTZ programming mode.
ZOOM
FOCUS
IRIS
PRESET
PATTERN
CLR
PGM
AUX
SET