Filter
Top Products
C4631M-A (8/10) 15
Clearing a Motion Area
To clear a motion area:
1. From the application window, click a channel pane. A white border highlights the selected pane.
2. Right-click the selected pane. The shortcut menu appears.
3. Click Motion.
4. Drag the bounding outline over the green highlighted cells (right to left).
Figure 8. Clearing a Motion Area
5. Right-click the motion area.
6. Click OK.
INSTANT RECORDING AND PLAYBACK
The instant recording feature allows you to start a manual recording session immediately from the live view mode. Initiate the instant recording
mode for channels that are scheduled for normal, alarm, or motion recording. Instant recording is the highest priority recording event.
Observe the following instant recording conditions:
• Instant (or normal) recording cannot start if the following conditions exist:
– Video loss is displayed for the channel.
– The Overwrite option is set to OFF and the hard disk normal partition storage space is full.
– The normal record mode is not available. If the event partition is set to 100 percent, the normal record mode is disabled because hard
disk space for storing normal record video is not available.
• Recording is affected by the available storage and settings for each partition (folder).
– Normal partition: Video recorded in the instant and normal record mode is stored in the normal partition. If the normal folder is set
to 0 (zero) percent (the event partition is 100 percent), the DVR will not record video in the instant or normal record mode.
– Event partition: Video recorded in the alarm and motion record mode is stored in the event partition. If the event partition is set to
0 (zero) percent, the DVR will not record video in the alarm or motion record mode.
• Instant, normal, alarm, and motion recording mode priority.
STARTING AND STOPPING INSTANT RECORD
NOTE: Use the remote control (or front panel) to select the instant recording mode.
To start instant recording, press the REC button and the channel number on the remote control. The recording indicator changes to the Instant
Record indicator .
To stop instant recording, press REC and the channel number on the remote control. The recording indicator changes to the scheduled recording
indicator.
I